DWhilea programmed recording is being made, you
cannotoperate your video recorder manually. If you
wantto cancel the programmed recording, press the
TV/STANDBYmbutton.
DIfthe video recorder is switched on a few minutes
beforea programmed recording is supposed to
begin,’TIMER RECORD’ will flash on the TV
screen.
DIfyou reach the end of the cassette during a
recording,the video recorder will automatically
ejectthe cassette.
DIfyou forget to load acassette, ’NO CASSETTE’
willappear on the TV screen and ’k’ will flash on the
videorecorder display.
DIfyou have put in a cassette which cannot be used
forrecording, the video recorder will automatically
ejectit.
DIf’TIMER FULL’ appears on the TV screen when
youpress the TIMER button,you have used up all
theavailable TIMER blocks. If you want to clear or
checka programmed recording (TIMER block),
selectit with the Pqor Prbutton.
DProgrammenumbers ’E1’ and ’E2’ are for
recordingsfrom other sources (through scart socket
EXT.1AV 1 or EXT.2 AV 2 ).
How to check or change a programmedrecording (TIMER)aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe TIMER buttonon the remote control twice.
cSelectthe programmed recording (TIMER) you want to
checkor change with the Pqor Prbutton.
dPressthe TIMER button.
eSelectthe entry field with the D/Sr or C/Sq
button.
fChangeany information with the Pror Pqbuttonor
withthe 0-9 buttons.
gConfirmwith the OK button.
hMakesure that the cassette you have put in can be
recordedon. Switch off with the TV/STANDBYmbutton.
DTheprogrammed recording will only function when
thevideo recorder is switched off with the
TV/STANDBYmbutton.
How to clear a programmed recording(TIMER)aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe TIMER buttonon the remote control twice.
cSelectthe programmed recording (TIMER) you want to
clearwith the Pror Pqbutton.
dPressthe CLEAR(CL), ybutton.
eConfirmwith the OK button.
19