Philips VR570 Searching for a tape position with picture scanning, Still picture / slow motion

The counter does not move

This occurs when there are no recordings on a portion of a tape. Therefore, the video recorder cannot receive any information from the tape. This is not a fault in your machine.

The display/the screen shows '-0:01:20'

If you rewind a cassette from the tape position '0:00:00', the counter will show for instance, '-0:01:20' (the cassette will be rewound to 1 minute and 20 seconds before '0:00:00').

'-:--' is displayed in the 'REMAIN' counter

This counter will automatically recognise the length of the tape. In addition, when you put in a cassette the video recorder must first calculate the time played. Therefore, '-:--' appears first and only after the tape has been running for a few seconds will the correct playing time be shown.

Searching for a tape position with picture (scanning)

1	While a cassette is playing, press	(reverse) or	(forward) one
0:30:21	or more times. This will, for example, appear in the display:
2	To stop at a certain place on the tape, press PLAY		.
	Decreased picture quality
	Scanning interferes with the picture quality. The sound is switched off. This is
	not a fault in your machine.

Still picture / slow motion

1	During playback, press STILL			to stop the tape and display a still
0:00:02	picture. This will, for example, appear in the display:
2	Each time you press	STILL	, the picture will advance one frame.
3	When you hold down the STILL			button, the tape will be played
	in slow motion.
4	When you press	several	times, you have a choice of several
	playback speeds for slow motion.
5	To continue playback, press PLAY .

ENGLISH

Playback 23