Philips VR423CAT, VR623CAT owner manual Playing, VHS Quasi Play Back Sqpb

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape’s record tab is missing, playback will start automatically.

3

If playback does not start automatically, press the VCR button, then press the PLAY/o button.

4

Press the STOP/p button to stop playback.

5

Press the REW(ind)/{ button to rewind the tape.

6

Press the EJECT button to remove the tape.

S-VHS Quasi Play Back (SQPB)

This unit has a SQPB function that allows you to view a tape you recorded in S-VHS format. An S-VHS format tape will play the same as a normal format tape. This unit automatically detects whether the tape is in S-VHS format or in normal format. When you play an S-VHS tape on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.

Playing 29

1Turn on the TV.

2Insert a tape in the VCR.

6	EJECT	POWER
	MENU	STATUS/EXIT	CLEAR
	1	2	3
	4	5	6
	7	8	9
	MEMORY		ALT.CH
5		0
	REC		PAUSE	3
	/OTR		/STILL
		PLAY
	REW	F.FWD
4		STOP
	CH.		VOL.
		MUTE
	VCR	TV	CBL/DBS

VCR/TV SPEED TIME SEARCH

ENTER SLOW

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/o button.

•Other playback options and features are on pages 38-45.

•If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. (However, playback will not begin if the VCR power is off and a timer recording is set.)