Philips VR423CAT owner manual Multi-Channel Television Sound System VR623CAT only

Multi-Channel Television Sound System (VR623CAT only) 43

Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.

Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo or second audio. If you play back the tape on a VCR that can’t play back tapes in stereo or second audio, the VCR will automatically play the tape in monaural sound.

Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups. Then follow the directions on page 44 to record in stereo or second audio and the directions on page 45 to play back tapes recorded in Hi-Fi stereo.

Understanding On-Screen Displays

When you receive a signal from a channel you’re watching, portions of the on-screen display shown below will appear when you press the STATUS/EXIT button on the remote control.

The indication 2ND AUD or TV STEREO that appears on this side

of the status display tells you if your VCR is receiving a second audio or stereo broadcast.

Although a program may be broadcast in both stereo and second audio, you cannot record in both stereo and second audio at the same time.

STOP		12:00 AM
TV STEREO		CH 02
		STEREO
		2ND AUD
SLP	1:23:45	HIFI

The indication 2ND AUD or STEREO that appears on this side of the status display tells you if the program you’re watching is available in second audio or stereo. This indication is not available during tape playback.

Even though a program is available in stereo or second audio, you still must program the VCR to receive or record the program. Follow the direc- tions on page 44.

To record and play back programs broadcast in stereo, even if you have a Single Speaker TV, just use one of the connections shown, then follow the steps on pages 44-45.

Stereo Amplifier

or Receiver

R	L
	AUDIO		ANT
		L	IN
	OUT	IN
		R
	VIDEO		OUT

Audio cables from	OUT IN	CH3 CH4
AUDIO OUT Jacks of
VCR to AUDIO IN Jacks
of Stereo Amplifier or
Receiver

SingleStereoMonitor

Speaker TV Speaker TV TV

OR OR

Monaural Sound

RF coaxial cable (supplied) from VCR’s

OUT Jack to TV’s ANTENNA IN Jack

Video cable from VIDEO OUT Jack of VCR to VIDEO IN Jack of monitor TV