Philips VR423CAT, VR623CAT owner manual Rerecording Tape Duplication, RF coaxial cable

Rerecording (Tape Duplication) 37

The instructions on this page show you how to copy tapes. The illustration uses two VR623CAT VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

	VCR 1
	Playing VCR	VCR 2 - Recording VCR
AUDIO	ANT	AUDIO		ANT
L	IN		L	IN
OUT IN		OUT	IN
R			R
VIDEO	OUT	VIDEO		OUT

OUT IN CH3 CH4 OUT IN CH3 CH4

	3. RF coaxial cable
2. Video cable from VIDEO OUT Jack	from the OUT jack of
of VCR 1 to VIDEO IN Jack of VCR 2	VCR 2 to the TV’s
	ANTENNA IN Jack

●Audio and Video cables are not supplied.

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever

channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the VCR but- ton, then press Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)

6

Press the SPEED button to select SP or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the RECORD but- ton on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1. AV REAR will appear on the TV screen. (BLUE BACKGROUND should be ON. Details are on page 46.)

•If you use the AUDIO and VIDEO In Jacks on the front of VCR 2, press Number buttons 0, 0, 2. AV FRONT will appear on the TV screen. (BLUE BACKGROUND should be ON. Details are on page 46.)

•Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protection, it may not record clearly.

•The VCR in the figure above is the VR623CAT. If you have the VR423CAT, use a single-plug audio cable to connect the AUDIO OUT jack on VCR 1 to the AUDIO IN jack on VCR 2.