Philips VR700/58 Automatic recording from a satellite receiver (SAT RECORDING), Switching on Direct Record

Automatic recording from a satellite
receiver (SAT RECORDING)
Youcan only use this function, when you have a satellite
receiver,which can control other equipment by a
’programming’function through a scart cable.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’RECORDING FUNCTIONS’ with the
P=or P;button,and confirm with the Pbutton.
dSelectthe line ’RECORD SETTINGS’ with the P=or
P;button,and confirm with the Pbutton.
eSelectthe line ’SAT RECORDING’ with the P=or
P;button.
fSelectthe required scart socket ’E1’or’E2’withthe
Qor Pbutton.
Ifyou want to switch off the function, select ’OFF’ with
the Por Qbutton.
gConfirmwith the OK button.
hUsea scart cable to connect the scart socket you
selectedon the video recorder ( EXT.1AV1 or
EXT.2AV 2 )tothe corresponding scart socket on the
satellitereceiver.
iInserta cassette.
jSwitchoff with the STANDBYmbutton. The video
recorderis now ready to record. The beginning and end
ofthe recording is controlled via one of the scart sockets.
DWhenthis function is switched on and the video
recorderis switched off, ’x’ will appear on the
videorecorder display.
Switching on ’Direct Record’
Whenthis function is switched on, the video recorder will
automaticallyrecord the programme selected on the television
bymeans of a scart cable.
DThevideo recorder must be switched off .
DWith’Connecting with scart cable and ’Easy
Link/NexTView’,the video recorder will also take the
programmenumber from the TV set automatically
withthe video recorder switched on.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’RECORDING FUNCTIONS’ with the
P=or P;button,and confirm with the Pbutton.
dSelectthe line ’RECORD SETTINGS’ with the P=or
P;button,and confirm with the Pbutton.
eSelectthe line ’DIRECT RECORD’ with the P=or
P;button.
fSelectthe function ’ON’ with the Qor Pbutton. If
youselect ’OFF’, the function will be switched off.
gConfirmwith the OK button.
hToend, press the MENU button.
iSwitchoff with the STANDBYmbutton.
jOnthe TV set, select the programme number you want
makethe recording from.
kPressthe RECORD/OTRnbutton with the video recorder
switchedoff.
DDon’tselect another programme number on your TV
set,until the ’search symbol’ in the display of your
videorecorder disappears. This can take up to one
minute.
DWhen’NOTV’ appears in the display, the programme
numbercould not be found. The video recorder
switchesoff automatically. In this case, read the
section’Recording without automatic switch-off’.
18