'- -' appears at PROG. .
•The programme number of the TV channel has not yet been assigned to the PlusCode programming number. Using the number but- tons 0..9 on the remote control, select the corresponding programme number (name) of the TV channel.
The following message appears on the screen: 'ERROR'
• The entered PlusCode programming number is incorrect. Correct your input or end with
STATUS/EXIT .
•Check the time/date (see chapter 'Installing your video', section 'Setting the clock').
•A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday.
Switching on 'PDC'
•Select 'PDC' using FWD 1- B 
CLEAR . Press '1' to switch off 'PDC' or press '2' to switch on 'PDC'.
7.When all inputs are correct, press 
The programming information is stored in a Timer block.
The following message appears on the screen: 'TIMER NOT COMPLETED'
• The channel is wrong.
8.Insert a cassette with an intact security tab (unprotected).
9.Switch off with 
. The pro- grammed recording will only function when the video recorder is switched off with
STANDBY/ON y .
Programming a recording (without the VIDEO Plus+ system)
1.Switch the TV on. If applicable, select the pro- gramme number for the video recorder opera- tion.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
4.Select 'ONCE', 'DAILY' or 'WEEKLY' recording with PLAY
FWD 1- B .
SELECT K L CHOOSE B
→ONCE
DAILY WEEKLY TIMER LIST
END=EXIT
Selecting ONCE/DAILY/WEEKLY recordings 'ONCE': Recording once
'DAILY': Repeated daily recordings (Monday to Friday)
'WEEKLY': Repeated weekly recordings (every week on the same day)
Error message: 'FULL'
•If this error message appears after you select 'ONCE', 'DAILY' or 'WEEKLY' on TIMER menu and press FWD 1- B , then all TIMER blocks are already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block), select the programme number on TIMER LIST menu and press CLEAR .
5.Select the desired Timer block with 
.
6.Enter the Start time (START), End time (STOP), Programme number (PROG.), PDC
information and the Date (DATE) with 
.
Programme numbers of the 'AV1', 'AV2' scart socket and 'AV3' (FRONT A/V CONNECTORS) You can also programme recordings from exter- nal sources via scart socket AV1(TV), AV2 (DECODER) or AV3 (FRONT A/V CONNEC- TORS). Select programme number 'AV1' with 0.0.1, 'AV2' with 0.0.2 or 'AV3' with 0.0.3.
7.When all inputs are correct, press STATUS/EXIT . The programming information
is stored in a TIMER block.
8.Insert a cassette with an intact security tab (unprotected).
9.Switch off with STANDBY/ON y .
The programmed recording will only function when the video recorder is switched off with
STANDBY/ON y .
18 | EN |
|
