STANDBY/ON y
STATUS/EXIT .

'- -' appears at PROG. .

The programme number of the TV channel has not yet been assigned to the SHOWVIEW number. Using the number buttons 0..9 on the remote control, select the corresponding pro-

gramme number (name) of the TV channel.

The following message appears on the screen:'ERROR'

• The entered SHOWVIEW number is incorrect. Correct your input or end with STATUS/EXIT .

Check the time/date (see chapter 'Installing your video recorder', section 'Setting the clock').

A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday.

Switching on 'VPS/PDC'

Select 'VPS/PDC' using FWD 1- B CLEAR . Press '1' to switch off 'VPS/PDC' or press '2' to switch on 'VPS/PDC'.

7.When all inputs are correct, press The programming information is stored in a Timer block.

The following message appears on the screen:'TIMER NOT COMPLETED'

• The channel is wrong.

8.Insert a cassette with an intact security tab (unprotected).

9.Switch off with . The pro- grammed recording will only function when the video recorder is switched off with

STANDBY/ON y .

Programming a recording (without the SHOWVIEW system)

1.Switch the TV on. If applicable, select the programme number for the video recorder operation.

2.Press MENU . The main menu will appear.

3.Select 'TIMER' with PLAY B-Kor STOP C-L . Then press FWD 1- B .

4.Select 'ONCE', 'DAILY' or 'WEEKLY' record- ing with PLAY B-Kor STOP C-L . Then press

FWD 1- B .

SELECT K L CHOOSE B

ONCE

DAILY WEEKLY TIMER LIST

END=EXIT

Selecting ONCE/DAILY/WEEKLY recordings

'ONCE': Recording once

'DAILY': Repeated daily recordings (Monday to Friday)

'WEEKLY': Repeated weekly recordings (every week on the same day)

Error message: 'FULL'

If this error message appears after you select 'ONCE', 'DAILY' or 'WEEKLY' on TIMER menu and press FWD 1- B , then all TIMER blocks are already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block), select the programme number on TIMER LIST menu and press CLEAR .

5.Select the desired Timer block with 0..9 .

6.Enter the Start time (START), End time (STOP), Programme number (PROG.), VPS/PDC infor- mation and the Date (DATE) with 0..9 .

Programme numbers of the 'AV1', 'AV2' scart socket and 'AV3' (FRONT A/V CONNECTORS) You can also programme recordings from exter- nal sources via scart socket AV1(TV), AV2 (DECODER) or AV3 (FRONT A/V CONNEC- TORS). Select programme number 'AV1' with 0.0.1, 'AV2' with 0.0.2 or 'AV3' with 0.0.3.

7.When all inputs are correct, press STATUS/EXIT . The programming information

is stored in a TIMER block.

8.Insert a cassette with an intact security tab (unprotected).

9.Switch off with STANDBY/ON y .

The programmed recording will only function when the video recorder is switched off with

STANDBY/ON y .

18

EN

 

Page 18
Image 18
Philips VR752/58, VR750/58 manual Programming a recording without the Showview system, Appears at Prog, Switching on VPS/PDC