Then, read the section 'Preparation for use' in the chapter 'Installing your video recorder'.
My screen is empty
•Many TVs are switched to the programme number for the scart socket by way of a con- trol signal sent through the scart cable.
•If the TV does not automatically switch to the scart socket programme number, manually change to the corresponding programme num- ber on your TV (see your TV’s operating instructions).
Connecting without a scart cable
Have an aerial cable ready (supplied).
1.Switch off your TV.
2.Remove the aerial cable plug
| from the aerial input socket of |
| |||
| the TV. Insert it into the AERI- |
| |||
| AL at the back of the |
|
|
|
|
3. | video recorder. |
|
|
| AERIAL |
Insert one end of the | AV 1 (TV) |
| |||
|
| AUDIO |
| ||
supplied aerial cable |
|
| OUTPUT |
| |
|
| AERIAL | L |
| |
|
| RF OUT | R |
| |
|
|
|
|
| |
| into the RF OUT at |
|
|
|
|
| the back of the video |
|
|
|
|
| recorder and the |
|
|
|
|
| other end into the |
|
|
|
|
| aerial input socket at | AV 1 | (TV) |
|
|
|
| AUDIO | RF OUT | ||
| the back of the TV. |
| OUTPUT | ||
|
| AERIAL | L |
| |
|
| RF OUT | R |
| |
|
|
|
|
| |
4.Insert AC cable into |
|
|
|
| |
| the wall socket. |
|
|
|
|
5.Switch on your TV and select the programme number used for video playback on your TV (see your TV’s operating instructions).
6.Start the TV’s channel search manually as if you wanted to save a new TV channel until the next screen appears (see your TV’s oper- ating instructions).
I do not see a Language setting picture
•Check the cable connections.
•Repeat the channel search on your TV.
7.Save this programme number setting on your TV for video recorder operation.
Then, read the section 'Preparation for use' in the chapter 'Installing your video recorder'.
Programme number for video recorder oper- ation
You have now saved a programme number for use by your video recorder as you would a reg- ular TV channel. This programme number must now be used in future for video recorder play- back (video recorder TV channel).
Audio output Connection
Prepare an audio cable (not supplied).
1.Switch off your audio amplifier.
2.Insert one end of the audio cable into the cor-
responding red and |
|
|
white AUDIO OUT- | 1 | (TV) |
PUT L/R socket at the back of the video recorder and the other end into the
corresponding audio input socket at the audio amplifier.
Connecting additional devices
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the socket AV2(DECODER).
AV 1 | (TV | ) |
|
|
CODER) |
|
|
|
|
AV 2 (DE |
|
|
| AV2(DECODER) |
|
|
|
| |
|
|
|
| AUDIO |
|
|
|
| OUTPUT |
| AERIAL | L | ||
|
| |||
| RF OU | T | R | |
PUSH MENU TO CONTINUE
Programme numbers of 'AV2' scart socket and FRONT A/V CONNECTORS
If you are using the scart socket AV2 (DECODER), select programme number 'AV2' with 0.0.2.
If you are using the FRONT A/V CONNECTORS, select programme number 'AV3' with 0.0.3.
5 | EN |
|
