USER GUIDE ENGLISH
SH230
Bluetooth® Wireless Headset
INDEX
Introduction
3
1.Charging the Headset 
3
2.Pairing the Headset
3
3.Wearing and Carrying the Headset 
4
4.General Usage
4
5.Extended Menu
6
6.Troubleshooting
6
7.Additional Information
7
8.Declaration of Conformity
9
Comand Summary Table
10
Note:
Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the Headset.
INTRODUCTION
Thank you for choosing a Blue- tooth® product from SouthWing. This user guide provides all the information you will need to use and care for your product.
All relevant information regarding your SouthWing product can be found on the support section of our website:
1. CHARGING THE HEADSET
You will need to charge the bat- tery of your Headset. To do so, follow these steps:
1.Plug the power supply into a power point.
2.Plug the connector of the power supply into the USB Charging Socket [1]. The Indica- tor Light [2] will turn green to in- dicate the Headset battery is charging.
3.Once the Indicator Light [2] turns off, the Headset is fully charged and can be removed from the power supply.
Please Note:
·The Headset will not function while charging.
·If the Indicator Light [2] remains off when charging, the battery is already fully charged and does not require fur- ther charging.
·To maximise battery life, do not char- ge the Headset for extended periods of time.
·Full battery capacity will be achieved
after two or three full charge/discharge cycles.
·When your battery is flat, it takes up to four hours to completely charge your headset.
2. PAIRING THE HEADSET
Auto-pairing
For added convenience, your headset has an
1.Put the mobile phone into pairing mode (see the instruc- tions which came with your phone). Ensure that the mobile phone is no more than 1metre away from the headset.
2.Enter the PIN number: 0000. If pairing is successful, the Indi- cator Light [2] will begin flashing every 3 seconds.
Normal pairing
You will need to follow the steps below if you want to pair your Headset with another mobile phone.
You will be able to pair your Headset with up to 3 devices.
1.Ensure the Headset is off.
2.Press and hold the On/Off Button [2] for about 5 seconds until the Indicator Light [2] flashes twice every second (you will also hear a series of high tones)
2
®Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. | 3 |
and licensed to SouthWing. |
|
