How to switch to 16:9
Youcan only use this function, when the video recorder
(socket AV1EXT1 )and the TV set are connected with a scart
cable.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the menu
buttons P=or P;andconfirm with the Pbutton.
dIfyou have a TV set in wide-screen format, select ’ON’ in
line’16:9 WIDE SCREEN’. If not, select ’OFF’ with the
menubuttons Por Q.
eConfirmwith the OK button.
fToend, press the MENU button.
Switching the remote control command
Ifyou have two video recorders with the same remote control
command,you can change the remote control command of the
handsetand the remote control command of one of the video
recorders.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the menu
buttons P=or P;andconfirm with the menu button
P.
dSelectthe line ’VCR 1 OR 2’ with the menu buttons P=or
P;.
eSelect’VCR 1’ or ’VCR 2’ with the menu buttons Qor
P
fConfirmwith the OK button.
gOnthe remote control, press the SELECT button and the
digitbutton 2at the same time to switch the remote
controlto ’VCR 2’.
DIfyou want to switch back to ’VCR1, press the SELECT
buttonand the digit button 1at the same time.
hConfirmwith the OK button.
DIfthe menu does not disappear, the video recorder didn’t
recognizethe remote control command. Repeat
stepg.
DAfteryou changed the batteries in the remote control, it
willswitch back to ’VCR 1’.
DIfyou entered the wrong remote control command, the
messagee.g.: ’VCR ONLY RESPONDS TO VCR 1
COMMANDS’appears on the TV screen or ’VCR 1’
appearsin the video recorder display, when you press a
buttonfor a few seconds.
Continuous playback
aPressthe MENU button.The main menu appears.
bSelectthe line ’SPECIAL SETTINGS’ with the menu
buttons P=or P;.Confirm with the menu buton P.
cSelectthe line ’REPEAT PLAY’ with the menu buttons
P=or P;.
dSelect’ON’ with the menu buttons Qor P. If you se-
lect’OFF’, the function will be switched off.
eConfirmwith the OK button.
fPressthe MENU button.
gInserta cassette and start the continuous playback with
the PLAYGplayback button.
Whenthe end of the tape or the end of the recording has
beenreached, it rewinds and starts playback again.
The automatic switch-off
Ifthe video recorder is not used for a few minutes in certain
modes(e.g.: STOP), it switchesto standby automatically. You
canswitch off this automatic switch-off in order to use the
videorecorder as a televisionreceiver.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the menu
buttons P=or P;andconfirm with the menu button
P.
16