Setting the clock and the date
Ifthe time in the video recorder display is not correct or if
’--:--’appears in the display, please set the clock manually.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’TIME/DATE’ with the menu buttons P=or
P;andconfirm with the Pbutton.
INSTALLATION
TIME/DATE
zTIME 20:00
YEAR |1998 }
{MONTH 02
DATE 06
________________________________
TOEXIT
PRESS MENU
eAdjust’TIME’, ’YEAR’, ’MONTH’, ’DATE’ if required, using
thedigit buttons 0-9 . Switch between fields with the
menubuttons P=or P;.
fConfirmeach entry with the OK button.
gToend, press the MENU button.
DIfa TV channel which transmits TXT/PDC is stored with
programmenumber ’P01’, time (from TXT) and date(from
PDC)will automatically be taken from the TXT/PDC
information.
User guide (OSD)
WithOSD (On Screen Display) the corresponding functions
appearon the TV screen as a menu. The most important
button-functionsare displayed at the bottom of the screen.
ECallup the menu: With the MENU button.
ESelecta line: With the P=or P;button.
ESelectwithin a line: With the menu buttons Qor
P.
EEnter/Alter:With the Qor Porwith the 0-9 button.
EStore:With the OK button.
EConfirm:With the menu button P.
EExitmenu: With the MENU button.
Emergency interrupt
Boththe video recorder and the remote control have an
’Emergencyinterrupt’ button. You can use the STANDBYmbut-
tonto interrupt any function.
Wheneveryou have operating problems you can simply
interruptthe function and start again.
Youcan practise operating your set without any worries. No
matterwhich buttons you press, you cannot damage it.
Important notes for operation
EYoucan switch on with the STOP hbutton, the 0-9 but-
tonsor by inserting a cassette.
EKeepyour video recorder connected to the mains at all
timesto ensure that programmed recordings can be
madeand that the televisionfunctions normally. The
powerconsumption required is less than 4W (saving
energymode).
EWhenthe video recorder is disconnected from the mains,
TVchannels will be stroredtypically 1 year, and
clock/timerdata will be stored typically7 hours.
Saving energy
Youcan choose between two methods of switching to
standby.
Normalmethod: Switch to standby using the STANDBYmbut-
ton.The clock time remains displayed.
Ifthe clock has not been set, ’--:--’ appears.
Tosave energy: Press the STANDBYmbutton twice. The clock
timedisappears from the display.
7