Philips VRA633AT owner manual 2Find your TV code, Press the Mute button

22 Setting the Remote to Operate a TV

Your VCR remote control may operate your TV. If the remote control doesn’t operate your TV now, follow the steps below.

1

Point the remote control at your TV and press the TV button. Then, press the POWER button. If your TV turns on or off, try the other TV buttons (see pages 24-25). If your TV doesn’t turn on or off, or if the other buttons don’t work, go to step 2.

1&6

	POWER	VCR/TV
4	VCR	TV
		PLAY

REW

STOP

2Find your TV code.

EJECT

CBL/DBS

F.FWD

2

MENU STATUS/EXIT CLEAR

Find the brand of your TV on the list below, and remem- ber the two-digit number beside it.

TV CODES

EMERSON	. . . . . .14	PHILCO	. . . . . .14
FISHER	. . . . . .11	PHILIPS	. . . . . .01
GE	. . . . . .10	PHILIPS MAGNAVOX.	.01, 02, 03
GOLDSTAR	. . . . . .04	QUASAR	. . . . . .07
HITACHI	. . . . . .12	RCA	. . . . . .10
JVC	. . . . . .05	SAMSUNG	. . . . . .17
MAGNAVOX	01, 02, 03	SANYO	. . . . . .11
MARANTZ	. . . . . .13	SEARS	. . .08, 11
MITSUBISHI	. . . . . .13	SHARP	. . . . . .16
MONTGOMERY WARD . . . .14		SONY	. . . . . .09
PANASONIC	. . . . . .07	TOSHIBA	. . . . . .08
PANASONIC-GAOO .	. . . . . .07	ZENITH	. . .06, 15

3

Press the MUTE button.

4

5	1	2	3
	4	5	6
	7	8	9
	VCR PLUS+/ENTER		ALT. CH
		0
	SPEED	TIME SEARCH PAUSE/STILL
	REC/OTR	MEMORY	SLOW

CH

VOL

MUTE3

Within 30 seconds, press the TV button.

5

Within 30 seconds, press the Number buttons to enter the two-digit code for your TV brand. For example, if you have a Zenith TV, press Number buttons 0, 6.

6

Repeat step 1. If the remote control works your TV, you’re fin- ished. If the remote control still doesn’t work your TV, repeat steps 3-5, using a different code for your brand (if available).

There is no guarantee that the

remote will work your TV.

Helpful Hints

•The remote control may only operate some features of your TV. For exam- ple, the remote control may turn on the TV power, but it may not change channels at the TV.

•If you can not change the channels at the TV using the Number but- tons, press the VCR PLUS+/ENTER button after you press the Number buttons. It may change channels at the TV.

•When you replace the batteries in the remote control, you must pro- gram the remote control again.

•Remember to point the remote con- trol toward the TV during steps 1-6.