40 Timer Recording with the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode programming numbers in your TV guide. Before you begin:
●Set up the channels at the VCR (page 12).
●Set up the VCR Plus+ and Cable/TV channel numbers (pages
●Set the clock (pages
●Put a tape in the VCR.
●Make sure the VCR light appears on the display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
1
Press the VCR button.
2
Press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
3
Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record. Then, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, or WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.
●DAILY: The VCR will record a program every day from Monday to Friday – starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record a program on the same day, at the same time, and for the same length of time every week.
VCR PLUS+ PROG.
→ONCE DAILY WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
POWER VCR/TV EJECT
1 | VCR | TV |
| CBL/DBS |
|
| PLAY |
|
| 4 | |
| REW | STOP |
| F.FWD | |
| MENU | STATUS/EXIT | CLEAR |
| |
3 | 1 | 2 | 3 |
|
|
4 | 5 | 6 | CH |
| |
|
| ||||
7 | 8 | 9 |
|
| |
| VCR PLUS+/ENTER | ALT. CH |
| ||
0VOL
2 | SPEED | TIME SEARCH | PAUSE/STILL |
|
| REC/OTR | MEMORY | SLOW | MUTE |
Helpful Hints
•If ERROR flashes on the screen when you select a DAILY recording at step 4, the program you selected takes place on a weekend. Select ONCE or WEEKLY for this program.
•CODE ERROR may flash on the screen after step 3 if you enter an incorrect PlusCode programming number (for example, one that is too short). The previous screen will appear. Enter the correct PlusCode programming num- ber.
•If CLASH flashes on the screen after step 3, the timer recording you just programmed and another timer recording overlap. The previous screen will appear. Enter a different PlusCode programming number or cancel the overlapping timer recording.
•If the VCR PLUS+ CROSS REF. MAP reappears after step 3, the VCR PLUS + channel number for the recording you entered was higher than 99. In this
case, enter the correct CABLE/TV chan- nel in the map. Then, press the MENU button and continue from step 4.
