Philips VRA641AT Turning on Your VCR, Press the VCR button, then press the Power button, Box/DBS

10 Turning on Your VCR

Before turning on your VCR, make sure batteries are in the remote control and the VCR, TV, and Cable Box/DBS (if applicable) are connected.

1

Press the VCR button, then press the POWER button.

2

6

Turn on the TV.

Wait for the VCR to set up channels.

2

Turn on the TV. Set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to. The menu shown below will appear.

SELECT , 9

→ENGLISH ESPAÑOL FRANÇAIS

MAKE SELECTION OR

PUSH >/OK TO CONTINUE

3

Press the PLAY 8 or STOP 9 button to select the language of the on-screen displays and menus.

4

Press the FF :/OK button. The menu shown below will appear.

CONNECT ANTENNA OR CABLE

TO VCR

THEN PUSH >/OK KEY

OR . . .

FOR PLAY ONLY – PUSH STOP

5

Press the FF :/OK button to begin automatic channel setup. AUTO CH. SET PROCEEDING PLEASE WAIT will appear on the screen. The VCR will memorize all of the channels you receive, so when you scan through channels using the CH(annel) 8/9 button, you’ll only scan through channels that you receive.

6

When channels are set up, AUTO CH. SET COMPLETED will appear on the screen briefly.

CBL / DBS		TV		VCR	1
VCR/TV		POWER		EJECT
QUICK PROGRAMMING
1	+	2	+	3
START		STOP		DATE
4	-	5	-	6
DBS	.............	DAILY	.............	WEEKLY
7		8		9
SPEED		0		CLEAR

STILL/SLOW

.....	........	+
- ...			3-5
REW		FF
	PLAY	/OK
	STOP
VOL	MENU	CH
EXIT/STATUS
	TIMER
SKIP SEARCH	INDEX	AUDIO/MUTE
SMARTPICTURE		REC /OTR

Helpful Hints

•Auto or – – : – – may appear on the display panel until the clock is set.

•If you do not want to set up channels now, press the STOP 9 button at step 5. TUNER NOT SET will appear on the screen briefly.

•You may not set up channels at step 5 if you are using a Cable

Box/DBS.