Philips VRA641AT owner manual Display Panel

22 Display Panel

VCR Display Panel	Remote Sensor
Information about VCR operations appears	Receives a signal from your remote control so
here. Different information appears at different	you can operate your VCR from a distance.
times. The display is brighter when the VCR	Press the VCR button on the remote control
power is on. The display dims automatically	before pressing other VCR operation buttons.
when you turn off the VCR power.

Cassette Compartment						TIMER Light
						This light appears when a
Insert a tape here.
						timer recording is
						programmed or is in
19∝m Hi-Fi				REW	FF	progress. Details are on
POWER			STOP/EJECT			pages 34-39. This light
STILL/PAUSE					PLAY	blinks rapidly if the VCR
	VCR/TV	/OK	REC/OTR
SmartPicture						is turned off to set a
VIDEO	L AUDIO R	CH	MENU/EXIT	CH
	SP					Timer Recording but a
		VCR
						tape is not in the VCR.
						The light also may flash if
						a Timer Recording is set
						but the clock is not set.

		SP SLP
			VCR
	Operation indicators			Clock/Counter/Channel Display
These indicators tell you the				Each time you press the EXIT/STATUS button,
current operation of the VCR.				information on the display panel will change. When
3: Play, Forward and Reverse				tape playback is stopped, press the EXIT/STATUS
	Searching			button repeatedly to see: the current time (when
				the clock is set); the real-time counter; and the
\: Record
				current channel number. During tape playback,
\I: Record Pause
				press the EXIT/STATUS button repeatedly to see
3I: Still Picture
				the real-time counter or the current time.
Tape Speed Lights
				If a dash (-) appears to the right of the clock when
This light indicates the current				the VCR power is off, Child Lock is activated.
				Details are on page 49.
tape speed. This VCR will play
				Line Input Mode
tapes recorded in LP speed, but
				When L-F appears on the display panel, you have
LP will not appear on the display
				selected A/V IN FRONT. Your audio and video
panel. This VCR will not record in
				cables should be connected to the AUDIO/VIDEO
LP speed. Details are on pages 37
				jacks on the front of the VCR if you are dubbing
and 52.
				tapes.
VCR Light				When L-1 appears here, you have selected A/V IN
This light appears when the VCR is				REAR. Your audio and video cables should be
				connected to the AUDIO/VIDEO jacks on the back
in VCR position.
				of the VCR if you are dubbing tapes.
Cassette-Inside Light				To select A/V IN FRONT or A/V IN REAR, press
This light appears when a tape is in the VCR. It				0,0, then press the CH(annel) 8/9 button so that
				A/V IN FRONT or A/V IN REAR appears on the
blinks when a tape is being ejected. This light blinks
				screen briefly.
rapidly if the VCR is turned off to set a Timer
				To exit Line Input mode, press the Number buttons
Recording but there is not a tape in the VCR.
				or the CH(annel) 8/9 button to select another
				channel.