Philips VRB413AT, VRB613AT owner manual Rerecording Tape Duplication, RF coaxial cable

Rerecording (Tape Duplication) 37

The instructions on this page show you how to copy tapes. The illustration uses two VRB613 VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

VCR 1

Playing VCR

		VCR 2 - Recording VCR
AUDIO ANT			AUDIO ANT
L		IN	L		IN
OUT	IN		OUT	IN
R			R
VIDEO		OUT	VIDEO		OUT
OUT	IN CH3 CH4		OUT	IN CH3 CH4
					3. RF coaxial cable
		2. Video cable from VIDEO OUT Jack			from the OUT jack of
					VCR 2 to the TV’s
		of VCR 1 to VIDEO IN Jack of VCR 2			ANTENNA IN Jack

●Audio and Video cables are not supplied.

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the VCR but- ton, then press Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)

6

Press the SPEED button to select SP or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1. AV REAR will appear on the screen. (Blue Background should be set to ON. Details are on page 46.)

•If you use the AUDIO and VIDEO In Jacks on the front of VCR 2, press Number buttons 0, 0, 2. AV FRONT will appear on the screen. (Blue Background should be set to ON. Details are on page 46.)

•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protec- tion, it may not record clearly.

•These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.

•The VCR in the figure above is the VRB613. If you have the VRB413, use a single-plug audio cable to con- nect the AUDIO OUT jack on VCR

1 to the AUDIO IN jack on VCR 2.