Philips VRB665AT, VRB615AT Record Link, 1Set the program on the DBS 2Insert a tape in the VCR

32 Record Link

This feature allows you to automatically record a satellite program that is programmed on your DBS. The VCR will start recording when it receives a signal from the DBS. The VCR stops recording when the DBS signal turns off.

1

Connect the AUDIO and VIDEO OUT jacks of the DBS to the AUDIO and VIDEO IN jacks on the back of the VCR. Set the program on the DBS. Turn off the DBS.

2

Insert a tape in the VCR.

3

1Set the program on the DBS.

2Insert a tape in the VCR.

CBL / DBS		TV		VCR	3
VCR/TV		POWER SMARTPICTURE
QUICK PROGRAMMING
1	+	2	+	3
START	.............	STOP	.............	DATE
4	-	5	-	6
		DAILY		WEEKLY
7		8		9
SPEED		DBS

Press the VCR button, then press the MENU button.

4

Press the PLAY 8 or STOP 9 button to select VCR SET

UP, then press the OK/STATUS button.

→ VCR SET UP	4,5
TUNER SET UP
INITIAL SET UP
SELECT: ,9	CONFIRM: OK
END: MENU

5

Press the STOP 9 button repeatedly to select AUTO

DBS RECORD LINK on the second page of the VCR SET UP menu. Press the FF : button to set AUTO DBS

RECORD LINK to ON.

	ALT	0	CLEAR
		STILL/SLOW
-	...-			+	-
REW				FF
		PLAY
		STOP
	VOL	OK/STATUS		CH
		MENU
		TIMER				6
TURBO		AUDIO/	SKIP	REC END
TIMER		MUTE	SEARCH	SEARCH
	EJECT			REC /OTR

DSPC		ON	PREVIOUS PAGE
			STEREO/SAP	SAP
ON SCREEN MODE		ON	→ AUTO DBS
BLUE BACKGROUND		ON	RECORD LINK	ON
TIMER REC SPEED		AUTO
VIDEO STABILIZER		OFF
AUDIO OUT		MONO
NEXT PAGE	CHANGE: 3			CHANGE: 3
SELECT: ,9			SELECT: ,9
END: MENU			END: MENU

6

Press the MENU button. Final Record Link instructions will appear on the screen for about 30 seconds, then the VCR will turn off automatically. “L-1” will blink on the display panel.

Helpful Hints

•Pressing the POWER button to turn on the VCR will set AUTO DBS RECORD LINK to OFF automatically.

•Do not turn on the DBS before the program starts; otherwise, the VCR will start recording when the DBS power is turned on.

•Depending on the type of DBS, the VCR may not record the first few seconds of the program. Or, the VCR may record slightly longer than the actual length of the program.

•If a Record Link is set, regular timer recordings will not occur.

•“Err L-1” will appear if you set up the Record Link when the DBS power is on. Turn off the DBS and set up the Record Link again.