Philips VRZ222AT owner manual Recording, VCR light does not appear, press the VCR/TV button once

VRZ222 layout 4/8/99 10:19 PM Page 25

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 03 or 04, whichever the CH3/CH4 switch on the back of the VCR is set to.

Recording 25

1Turn on the TV.

2Insert a tape in the VCR.

2

Insert a tape with its record tab intact in the VCR.

3

Press the VCR button.

4

If the VCR light appears on the display panel, go to step 5. If the

3

5

POWER VCR TV

1 2 3

4 5 6

7 8 9

VCR PLUS+
0	+100
SPEED	MUTE

VCR/TV

CHANNEL

VOLUME

4

6

VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears briefly on-screen. (Details about tape speed are on page 30.)

6

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording. The REC light will appear.

8

To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.

9

To stop recording, press the STOP/p button.

PLAY

	REW			F.FWD	9
		STOP
7	REC/OTR	MEMORY		PAUSE/STILL	8
	MENU	STATUS/EXIT	CLEAR	EJECT

Helpful Hints

•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.

•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 26 - 36.

•You can change the tape speed during a recording, but some distor- tion will appear on the tape.

•The VCR will record in a preset vol-

ume.