Setting Up the VCR Plus+ Programming System | Philips VRZ222AT

VRZ222 layout 4/8/99 10:19 PM Page 32

32 Setting Up the VCR Plus+ Programming System

1

First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly.

Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must program the VCR with your local channel infor- mation. To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

Channels

	Station	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters

Channels

	Station	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters

Image 32

Philips VRZ222AT owner manual Setting Up the VCR Plus+ Programming System, Channels

Contents

VRZ222AT Dear Philips Magnavox product owner For Customer Use Introduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUT Recording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Press the VCR button Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Setting the Clock Enter a 0 before a single digit num- ber Daylight-Saving Time Language Selection Remote Control Buttons Speed Button Remote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Timer Recording Daily Timer Recording cont’d Instructions continue on Press the STATUS/EXIT button. Program WAS COM Tape Speeds Checking or Cancelling Timer Recordings See page 42 for more hints Setting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ button Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Antenna Repeat Play Press the F.FWD/B button so that on appears beside Real-Time Counter Memory Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Automatic Operation Features Specifications Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 or Limited Warranty Video Cassette Recorder Index Automatic VRZ222 layout 4/8/99 1019 PM Supplied Accessories