VRZ222 layout 4/8/99 10:19 PM Page 33
| Setting Up the VCR Plus+ Programming System (cont’d) 33 |
2 | Examine the lists on |
2 page 32. |
Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR Plus+ and Cable/TV channels do not match, you must tell the VCR the VCR Plus+ and Cable/TV channel numbers by following steps 3 - 7. Make each entry within 60 seconds of the previous entry.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→ REPEAT PLAY OFF
ON SCREEN MODE LANGUAGE
VCR PLUS+ REF. MAP
TO END PUSH EXIT
5
Press the PLAY/o button or the STOP/p button to select VCR PLUS+ REF. MAP, then press the F.FWD/B button.
POWER | VCR | TV |
|
| VCR/TV |
1 | 2 | 3 |
4 | 5 | 6 |
|
| CHANNEL |
7 | 8 | 9 |
VCR PLUS+ |
|
|
0+100
SPEED | MUTE | VOLUME |
6 |
| PLAY |
|
REW | STOP | F.FWD | |
| REC/OTR | MEMORY | PAUSE/STILL |
3 | MENU | STATUS/EXIT | CLEAR | EJECT |
7 |
|
|
|
|
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
98 | 98 |
99 | 99 |
1 – – – –
22
TO SELECT CH PUSH op
THEN ENTER CH NO. TO END PUSH EXIT
6
Look at the lists you filled in on page 32. For stations whose
VCR Plus+ and Cable/TV channels do not match, press the PLAY/o button or the STOP/p button until the arrow is beside the VCR Plus+ channel you need. Then, press the Number buttons to enter the corresponding Cable/TV channel from your list. (Enter a “0” before single- digit channels.) Enter all the stations on your list.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
9898
9999
1– – – –
22
TO SELECT CH PUSH op
THEN ENTER CH NO.
TO END PUSH EXIT
7
Press the STATUS/EXIT button.
Helpful Hints
•To erase a Cable/TV channel num- ber, repeat steps
Press the CLEAR button, then press the STATUS/EXIT button.
•To select line input for the Cable/TV channel, press 0,0. AUX will appear
•When you receive the VCR, all the VCR Plus+ channel numbers and Cable/TV channel numbers are the same.
