| Installation | |
|
|
|
D Connecting to an additional appliance | Setting up | |
with powerful speakers | between Center and Station | |
English
To enjoy the sound effect brought by powerful speakers on an external appliance, e.g. a
1Insert the red plug of the red/white audio cables (not supplied) to the red socket LINE OUT R and the white plug to the white socket
LINE OUT L
2Connect the other end of the audio cables to the AUX IN terminals of the additional appliance
AUX IN
R | L |
LINE |
|
OUT |
|
Center
Using AC power
1Make sure all the connections have been made before switching on the power supply
2Connect the AC power cord to the wall socket. This switches on the power supply
When Center or Station is switched to standby, it is still consuming some power. To disconnect the system from the power supply completely, remove the power plug from the wall socket.
The type plate is located on the rear of the set.
1The first time you set up
2First, connect the Center to power supply, and then, connect the Station to power supply
Center/Station:
➜The screen lights up. Auto installation/ connection starts
➜You will enter HD (Harddisk) mode when the installation/connection is finished
3Relocate Center and Station as desired: plug and stream
●Simply unplug your Center or Station and power them up in other rooms.
➜ You will be able to stream the harddisk music between Center and Station
Helpful hints:
–Make sure you have powered up Center before powering up Station.
IMPORTANT!
–Avoid thick walls. Your Center and Station should never be blocked by 2 or more walls.
–Avoid placing the sets close to large metal objects.
–Adjust the location of your Center and Station
according to the reception status of
– indicates maximum reception
– indicates minmum reception
–WACS700 do not support range expander devices.
23
