FM radio
Tuning to radio stations
1Check the set is switched on or to standby (See Basic functions, Switching on/to standby and selecting functions, Switching to Eco power/ on)
2Press SOURCE once or more to select Radio (on the remote control, press TUNER/AUX once or more)
➜ Playback screen appears. Display shows: Radio, radio station frequency and If programmed, a preset number
3Press and hold 3 or 4 until the frequency in the display starts running
➜The radio automatically tunes to a station of sufficient reception. Display shows searching during automatic tuning
➜If a station is received in stereo, 
is shown
➜When you are receiving an RDS station,
is shown
4Repeat step 3 if necessary until you find the desired radio station
● To tune to a weak station, press 3 or 4 briefly and repeatedly until optimal reception is found
Storing preset radio stations
You can store up to 40 preset radio stations in the memory.
Autostore: automatic programming
Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in the order of radio frequencies: RDS stations followed by FM stations. Maximum 10 RDS stations will be stored (from Preset 01 to Preset 10).
●To select Autostore radio,
a.Press MENU
b.Use the navigation controls 3 or 4 and 2 to
select
➜Display shows: Autostore Please wait...
➜After all stations are stored, the first autostore preset station will then automatically play
Manual programming
1Tune to your desired radio station (see Tuning to radio stations)
2On the remote control, press Program to store
the station
➜ The station is stored in the 1st vacant preset position. Display shows its preset number
3Repeat steps
Helpful hints:
–If you store more than 40 stations, the new station will replace the 1st preset station.
To listen to a preset station
1 Press 1 to enter the list of presets
English
2Use the navigation controls 3 or 4 and 2 to select the desired station
41
