TI SERIES TWEETER

INSTRUCTION MANUAL - TICS1T

-75w RMS / 150w PEAK Power Handling

-Pivoting Silk Dome Tweeter

-Inline 6dB High Pass Crossover Filter

-Neodymium Motor Structure

-Ferrofluid Cooling Technology

-Surface and Flush Mounting Hardware Included

Important Note: Each tweeter features an inline (capacitor) high pass crossover filter, using the tweeter without this will damage the tweeter. Each tweeter comes pre-assembled in the flush mount housing, to install the surface mount housing you will need to temporarily remove the crossover (capacitor). Do not remove this crossover (capacitor) permanently. The one exception is if the Ti Series Component crossover is being used instead. For example, if a damaged tweeter from the Ti65CS component system is being replaced then the inline crossover should be removed permanently.

FLUSH MOUNT

Each Ti Series component set comes with a flush mount and surface mount installation kit. The Flush mount requires 3⁄4” depth and a 2-1/16” hole in the mounting surface. (figure 5)

SURFACE MOUNT

Screws are provided for use when cutting a hole in the door panel or other mounting surface is not an option. Make sure that the surface mount location is free of passenger movement that might damage the tweeter. (figure 6)

TWEETER ASSEMBLY - FLUSH MOUNT

FLUSH MOUNT RETAINING RING

Slide the retainer ring over the tweeter housing onto the inner cup. Rotate the retainer ring to lock all three pieces into place.

TWEETER ASSEMBLY - SURFACE MOUNT

SURFACE MOUNT RETAINING RING

Slide the retainer ring over the tweeter housing onto the outer cup. Rotate the retainer ring to lock all three pieces into place.

TWEETER HOUSING

INNER CUP

Once you have the inner portion assembled slide it into the outer cup and twist to lock into place.

OUTER HOUSING

SPRING RETAINER

The spring retainer is what holds the tweeter in place. Its ￿ngers clamp against the inside of the wall you are mounting the tweeter to.

TWEETER HOUSING

OUTER CUP

LIMITED WARRANTY:

Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.

INTERNATIONAL WARRANTIES:

Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact that country’s reseller for information.

© 2011 Phoenix Gold • www.phoenixgold.com

Page 1 Page 1
Page 1
Image 1
Phoenix Gold TICS1T instruction manual Tweeter Assembly Flush Mount Flush Mount Retaining Ring, Tweeter Housing Inner CUP
Page 1 Page 1

TICS1T specifications

The Phoenix Gold TICS1T is an innovative car audio amplifier that showcases the perfect blend of power, efficiency, and advanced technology. Designed for audiophiles and casual listeners alike, the TICS1T delivers an immersive sound experience, making it a popular choice in the competitive car audio market.

One of the standout features of the Phoenix Gold TICS1T is its compact design. Measuring just 10.5 inches in length, it can easily fit in various installation locations without compromising the quality of sound. Despite its small footprint, this amplifier is capable of delivering a remarkable output of up to 1,000 watts peak power, pushing the limits of what a compact amplifier can achieve.

The TICS1T utilizes modern Class D technology, which allows for higher efficiency and less heat generation compared to traditional amplifiers. This technology not only enhances the overall performance but also ensures longer operational life and reduces the risk of overheating during extended use. The amplifier can perform optimally, maintaining excellent sound quality even at high volume levels.

Another defining characteristic of the TICS1T is its built-in low-pass crossover. This feature enables users to tailor the audio output to their specific needs, ensuring that bass frequencies are delivered with clarity and depth. The adjustable frequency range allows listeners to customize their experience, making it suitable for both bass enthusiasts and those who prefer a more balanced sound profile.

Furthermore, the Phoenix Gold TICS1T incorporates advanced protection circuitry to safeguard against short circuits, thermal overload, and other potential risks that could damage the amplifier. This robust protection ensures reliability and peace of mind during operation.

Additionally, the amplifier boasts RCA inputs and a remote bass level control, providing flexibility in installation and ease of use. Users can conveniently adjust bass levels without having to reach for the amplifier itself, enhancing driving and listening experiences.

Overall, the Phoenix Gold TICS1T stands out in the market with its combination of high power output, advanced Class D technology, and customizable features. Whether you are looking to upgrade your car audio system or simply want a reliable amplifier that performs exceptionally well, the TICS1T is a compelling choice that delivers on all fronts.
Top Page Image Contents