8
CE 3.2 ELLIPTICAL TRAINER
ASSEMBLY
STEP 1:
First make sure to connect the Wire Harness – Middle (103) and Wire Harness – Lower (104) as shown below.
Attach the Front Upright Frame (2) to the Frame (99) and secure using two M10 x 90mm Bolts (78), two ID 10mm Curve Washers (101) and two M10 Nuts (98).
NOTE: Make sure the wire is recessed into the frame, do not trap the wire.
2
78 99
98
Visit us at: www.smoothfitness.com