Annunciator Module
IMPORTANT SAFETY INSTRUCTIONS
Your ANNUNCIATOR MODULE has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the unit:
•Read the installation and operating instructions in this manual carefully. Be sure to save it for future reference.
•Read and follow all warning and instruction labels on the product itself.
•To protect the Annunciator Module from overheating, make sure all openings on the unit are not blocked. Do not place on or near a heat source, such as a radiator or heat register.
•Do not use your Annunciator Module near water, or spill liquid of any kind into it.
•Be certain that your power source matches the rating listed in the specification section of this manual. If you’re not sure of the type of power supply to your facility, consult your dealer or local power company.
•Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.
•Do not overload wall outlets and extension cords, as this can result in the risk of fire or electric shock.
•Never push objects of any kind into this product through ventilation holes as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
•To reduce the risk of electric shock, do not disassemble this product, but return it to Phonetics’ Customer Service, or another approved repair facility, when any service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
•If anything happens that indicates that your Annunciator Module is not working properly or has been damaged, disconnect it immediately and follow the procedures in the manual for having it serviced. Return the unit for servicing under the follow- ing conditions:
1.Liquid has been spilled into the product or it has been exposed to water.
2.The unit has been dropped, or the enclosure is damaged.
3.The unit doesn’t function normally when you’re following the operating instructions.
FCC Requirements
Part 15: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a com- mercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
