Photogenic Professional Lighting PowerLight 1250 manual Specifications, 105-125 VAC, 60 Hz, 10 amp

	SPECIFICATIONS
	PL1250 & PL1250DR
General:
Flash Power	16 to 500 watt-seconds.
	maximum (6 f-stops)
Flash Duration	1/1300 second at Full
	1/640 second at 1/32
Recycling time	0.5 to 1.5 seconds
Power Control	Full to 1/32 range.
	(6 f-stops)
	0.1 f-stop resolution.
	Digital Display Accessory
Modeling Light Power	250 Watt Quartz, ESS
Modeling Light Control	Full to 1/32 range.
	0.1 f-stop resolution.
	Line voltage regulated.
Triggering	Built in Photoslave.
	Push to Test button.
	Synchronization Jack.
	5 volt isolated.
Main Supply	105-125 VAC, 60 Hz, 10 amp.
Consumption	0.2 amps idling,
	15 amps charge.
Voltage Stabilization	Plus or minus 0.05 f-stop.
Overload Protection	Fuse. 3AG type,
	15 Amp, SLO-BLO.
Packaging	Extruded Aluminum case.
Weight	5 pounds, 8 ounces.
Dimensions (housing only)	4.5” x 4.5” x 6.75”
Flashtubes and Modeling Lamps:
Flashtube	Plug-in style, use only
	Photogenic’s Standard C4-15
	or C4-15C or C4-15F.
Modeling Lamp	250-Watt Quartz Halogen, ESS.
	150-Watt Quartz Halogen, ESP.
	100-Watt Quartz Halogen, ESR.
Fuse	3AG type, 15 Amp, SLO-BLO.