Photogenic Professional Lighting 1250, 1250DR, 2500DR manual Service, Umbrellas, Softboxes

POWERLIGHT QUICK CHANGE ACCESSORIES

UMBRELLAS:

EC32BC	32” White satin flat panel inner umbrella with black blocking outer
	umbrella.
EC45BC	45” White satin flat panel inner umbrella with black blocking outer
	umbrella.
EC60BC	60” White satin flat panel inner umbrella with black blocking outer
	umbrella.
EC32S	32” Silver satin flat panel inner umbrella with black blocking outer
	umbrella.
EC45S	45” Silver satin flat panel inner umbrella with black blocking outer
	umbrella.
EC60S	60” Silver satin flat panel inner umbrella with black blocking outer
	umbrella.

SOFTBOXES:

SB12x36	12”x36” Satin white front panel, silver inner panels with black blocking
	outer and Quick-Change bracket.
SB24x32	24” x 32” Satin white front panel, silver inner panels with black
	blocking outer and Quick-Change bracket.
SB36x48	36”x 48” Satin white front panel, silver inner panels with black blocking
	outer and Quick-Change bracket.
SB48x72	48”x 72” Satin white front panel, silver inner panels with black
	blocking outer and Quick-Change bracket.
SB22	22”x22” Satin white front panel, silver inner panels with black blocking
	outer and Quick-Change bracket.
SB36	36”x36” Satin white front panel, silver inner panels with black blocking
	outer and Quick-Change bracket.
OB48	48” Octagon - 48” Satin white front panel, silver inner panels with black
	blocking outer and Quick-Change bracket.

SERVICE

The photographer should not attempt to make repairs.

Consult a dealer for an authorized Photogenic Professional Lighting service agent. This will provide you safety, insure proper operational functions and provide continuation of your warranty.

For replacing the flashtube or modeling lamp, follow the directions and specifications given earlier in this manual in the setup section.

Before removing the old tubes or installing new tubes, always unplug your PowerLight and discharge the stored energy by pressing the “test” button. Wait approximately two hours for the main capacitors to deplete any residual stored wattage. Never place your fingers or any metal objects into the flash or modeling sockets. Contact with high voltage may result.