Advanced PL2 series Accessories.
PLIRC-1 Infrared remote controller for models 1250DR and 2500DR. (must be used with PLDIR-1 receivers)
Similar to TV, VCR, DTV universal remote controllers, the
All PowerLights must have
Select a Unit Number on one of the top ten buttons, then control the PowerLight with the lower buttons, observing the PowerLight digital display for the changes.
The All button, under Unit Number, transmits the changes to all active PowerLights. This enables the photographer to raise or lower flash or model levels on all the units, without the laborious task of changing them all, individually.
STANDBY lets the photographer put all the PowerLights into a standby state to stop public photographers from slaving the units at a wedding, or some studio units can be put in standby when not required for a shot. The infrared control can easily reach to units on
Along with infrared transmitter hardware and an IBM compatible computer using Windows 95 or 98, the software is used by the photographer to specify the PowerLight settings for up to nine units with independent settings and save a studio settings or as a pose file. An unlimited number of pose files may be saved. All PowerLights must have
Along with infrared transmitter hardware and a MAC computer using Windows 95 or 98, the software is used by the photographer to specify the PowerLight settings for up to nine units with independent settings and save a studio settings as a pose file. An unlimited number of pose files may be saved. All PowerLights must have