Damaged or worn components must be replaced.
When major components have been
replaced, ensure that all covers and
guards are securely fitted, before t he
generator is put into service.
After rectification of any faults found, remove all test
connections and reconnect all control system leads. Restart
the set and adjust VOLTS control potentiometer on AV R
controlled generators by slowly turning clockwise until rated
voltage is obtained. Refit all terminal box covers/access
covers and reconnect heater supply.
Failure to refit all guards, access covers
and terminal box covers can result in
personal injury of death.
Caution !
Caution !