22
STO-ST9 The status 0-9 keys are used to send a pre-programmed status message to the
EDACS or P25 Trunked site.
PVT The PVT key enables or disables Private Mode for the System/Group displayed.
See the Private Operation section.
KEY Displays the Encrypted Keys. This selects the DISP KEY operation from the
menu functions.
G* This key function is used in Conventional Mode to send G-STAR emergency
signaling.
PA This key function enables and disables the Public Address feature.
# DTMF keypad function.
1 thru 9 Keypad numbers.
* DTMF Keypad function.
8.7.4 Primary Functions (Quick Access) The secondary function of the k button is to toggle the keypad buttons between their primary
function and their secondary function. When the secondary keypad is active, i.e. entering phone
digits for an interconnect call, the k button can be used to toggle the keypad buttons back to
their primary function, perform a task (siren/light enable), and then toggle back to finish entering
the digits for the phone number. PRIMARY is displayed when the k button is used to
toggle the keypad keys back to their primary functions. This provides quick access to the primary
functions of the keypad. This is a programmable feature of the k button only. Careful
consideration should be given to possible operational conflicts before enabling this feature.
Several keys on the Scan version have a secondary function. The m key is the SELECT
secondary function with the C key remaining the same for the secondary function. On the
System version, the o has a secondary function for DELETE, m is SELECT, and c
retains its CLEAR function.