42
2. Press < or > on the SCAN add/delete control. The current status of the group is
displayed for a time-out period.
3. Press > to delete the group from the scan list. "S", "2" or "1" turns off. Any group that is
not in a trunked system group scan list will show a "blank" for the time period when it is the
selected channel.
12.6.3 Nuisance Delete A group can also be deleted from the scan list, if it is not the currently selected group, by pressing
> during scan operation while the radio is displaying the unwanted group. The group will be
deleted from the system's group scan list in the same manner as if done using the steps above.
Deletions performed in this manner will not remain deleted if the radio is turned off and then back
on.
12.6.4 Turning Scan On 1. Toggle scan operation by pressing k. The SCAN indicator will turn on when the radio is
scanning.
The k key light will blink when temporarily disabled. Scanning will stop
while microphone is off-hook if the hookswitch feature is enabled through
programming.
2. When a group on the scan list receives a channel assignment, the radio unmutes on the
assigned channel, the BSY indicator comes on and the received scan group is displayed.
• The radio will continue scanning if a new group is selected when scan is on.
• Pressing the PTT button when scan is on will cause the radio to transmit on the displayed
group or on the currently selected group depending on programming.
• Pressing < when scan is on will cause the radio to recall the scanned group that was
last received. This group is recalled for a period equal to the scan hang time.
12.6.5 Priority Group Scanning When scan is enabled and the Priority 1 and Priority 2 groups have been identified, the radio will
listen to calls on those groups and the selected group. While receiving a scanned group call, the
radio will continue to monitor the selected Priority 1 and Priority 2 groups and will drop the call if
the selected group or other higher priority call becomes active. During a Priority 2 call the radio
will continue to monitor for a Priority 1 group call.
The radio will monitor for Agency and Fleet calls that correspond to the Agency and Fleet
associated with the Priority 1 and Priority 2 groups. Priority Agency and Fleet calls will be
indicated by displaying AGENCY or FLEET on the System line of the display and associated
Priority 1 or 2 group on the Group line of the display.
12.6.6 Turning Scan Off Toggle scan operation off by pressing k. The radio will resume operation on the selected
group.