BATTERIES
IMPORTANT: Always use ALKALINE batteries for optimal performance.
Always remove the batteries for prolonged storage.
CHECK THE BATTERIES if your detector exhibits any of the following symptoms:
●1 The unit does not turn on. ●2 Low speaker volume.
●3 Unit beeps continuously at low sensitivity setting.
The Low Battery indicator light will come on and stay on if the batteries are discharged. It should flash momentarily when the Power Switch is turned off.
IMPORTANT: Your Pioneer 101 metal detector requires two
Follow these steps to install the batteries.
●1 Carefully remove the battery compartment door by pressing the release clip on the right side of the door.
●2 Snap one battery onto each of the terminals and place the batteries inside the compartment. Insert one battery with the terminals facing down, and the second battery with terminals facing outward.
●3 Replace the compartment door by carefully inserting opposite side of clip first. Then press down on clip side until battery door snaps into place.
Release Clip
First Battery terminals facing in
Second Battery terminals facing out
Second Battery
First Battery
4
