Siemens PC 670 manual Removing and installing the disk drive

Maintaining and Extending the Computing Unit Release 04/02

4.5.3Removing and installing the disk drive

1.Open the housing as described in Chapter 4.1.

2.Remove the drive mounting as described in section 4.5.1.

3.Undo the interlocking of the controller flexible cable on the motherboard and pull the flexible cable out of the plug connection.

4.Undo the two fixing screws (TORX T8) on the housing.

5.Lift the floppy disk drive up and out of the housing.

6.Proceed in the reverse order to install the new drive. The new drive must be of the same type as the one removed.

Floppy disk drive fixing screws

Figure 4-15 Assembly of the computing unit floppy disk drive

4-20 Panel PC 670 Computing Unit, Equipment Manual