Siemens PC 670 manual Graphic, Interfaces, Function displays light-emitting diodes on device

Technical Data Release 04/02

Graphic

Graphic controller		UXGA LCD controller on the AGP bus
Graphic store		bis zu 32 MB SDRAM sind Bestandteil des
		Hauptspeichers und können konfiguriert werden
		(8/16/32MB)
Resolutions/frequencies/colors		CRT: up to 1600x1200/85 Hz / 65536 colors with
			PC133
			up to 1280x1024/85 Hz / 65536 colors with
			PC100 memory modules
Interfaces
COM 1		Serial port 1 (V.24 / TTY), 25 pin subminiature Cannon
		connector
COM 2		Serial port 2 (V.24), 9 pin subminiature Cannon
		connector
LPT1		Parallel port (standard, EPP and ECP modes)
		Interface for printer with parallel port
VGA		VGA port, connection for external monitor
Keyboard		PS/2 keyboard connection
Mouse		PS/2 mouse connection
USB		3 channels (1x internal, 2x external)
Card bus		1 port (max. type III)
DP12 port, potentially isolated		9-pin sub D socket connector, screw-type locking
•	Transfer rate	• 9,6 kBaud to 12 Mbaud, configurable by SW
•	Mode	•	potentially isolatedt*3:
			data lines A, B
			control lines RTS AS, RTS_PG
			- 5V voltage supply (max. 90 mA)
		•	ground connection:
			- shield of the DP12 connecting line
•	Physical interface	•	RS485, potentially isolatedt*3
•	Memory address area	•	0CC000h ...0CC7FFh or 0DC000h ...0DC7FFh
•	Interrupts	• IRQ5, 10, 11 or 15 configurable by SW
Ethernet		Ethernet port (RJ45)
Function displays (light-emitting diodes) on device
Computing unit SIMATIC Panel PC 670		FD/LS240 access (on FD/LS240 drive on the side of
		the computer box)
		CD ROM access (on CD ROM drive, if installed)
*3	Electrical isolation through an extra-low voltage safety circuit (SELV)

A-4 Panel PC 670 Computing Unit, Equipment Manual