Siemens PC 670 manual Computing Unit Time and/or Date are Not Correct, USB Device Does Not Work

Release 04/02 Fault Diagnosis

6.5Computing Unit Time and/or Date are Not Correct

Remedy

Correct the time and date in the Setup menu.

Press F2 during the boot routine to call in the Setup menu (refer to Chapter 5).

Note

If the date and time remain incorrect after switching the unit off and on again, the battery is empty.

Information on changing the backup battery is available in Chapter 4.3.

6.6USB Device Does Not Work

The USB interface is not detected by the operating system. It is only fully supported, at present, by Windows 98, Windows 2000 and Windows XP. In the case of Windows NT, only the connection of a USB keyboard and USB mouse are supported.

Panel PC 670 Computing Unit, Equipment Manual 6-5