Siemens PC 670 manual Serial mouse connection, PS/2 Keyboard connection

Connecting and Switching on the Computing Unit Release 04/02

Serial mouse connection

You can connect a serial mouse to the serial port COM 2. To operate a serial mouse, you have to install and assign parameters to the suitable mouse driver. To do this, please refer to the description of your mouse or the description of your operating system for the necessary information.

1.Turn your device off.

2.Plug your serial mouse onto the mouse connector labeled COM 2.

3.Screw the connector tight.

4.Restart your device.

How to connect a USB mouse is described in “Connecting USB devices” below.

PS/2 Keyboard connection

You can connect a PS/2 keyboard to the computing unit.

Port for PS/2 keyboard

Figure 3-5 Connecting a PS/2 Keyboard

Proceed as follows:

1.Disconnect the computing unit from the mains power supply.

2.Plug in the PS/2 keyboard connector.

3.Connect the computing unit to the mains power supply.

Note

We recommend you to use a keyboard with a straight keyboard connector so that the connector does not conceal adjacent ports.

3-8 Panel PC 670 Computing Unit, Equipment Manual