Siemens PC 670 manual Menu Boot-Sequence

Release 04/02 Configuring the Computing Unit in BIOS Setup

Hard Disk	[Disabled]	The hard disk does not shut down.
Timeout	[10, 15, 30, 60]	Time since the last hard-disk access, the hard disk
		is shut down. On the next
		access the hard disk will be activated again
		with a short delay.

5.1.5Menu Boot-Sequence

Overview

This menu lists the boot devices in prioritized groups.

			PhoenixBIOS Setup Utility
Main		Advanced	Security	Power		Boot Sequence		Version		Exit
							Item Specific Help
+ Removable Device
+ Hard Drive							Keys used to view or
ATAPI CD-ROM Drive							configure devices:
							<Enter> expands or
							collapses devices with
							a + or –
							<Ctrl+Enter> expands
							all
							<+> and <–> moves
							the device up or down.
F1	Help		Select Item	+ / –	Change Values			F9	Setup Defaults
ESC	Exit	Select Menu		Enter	Select		Sub-Menu	F10	Save and Exit
Figure 5-18 “Boot Sequence” Menu

This menu lists the boot devices in groups. The group with the highest priority is at the top. The procedure for changing the sequence is as follows:

Use the ↑↓ keys to select a group and the + or – keys to move the group to its new position in the sequence.

Note

During booting the boot drive can be selected with the ESC key.

Panel PC 670 Computing Unit, Equipment Manual 5-25