Correct Usage

Please note the following:

Warning

!The device may only be used for the application cases specified in the catalog and the technical description and may only be used in combination with third-party equipment and components recommended or approved by Siemens.

Appropriate transport, and appropriate storage, installation and assembly, as well as careful operation and maintenance, are required to ensure that the product operates perfectly and safely.

Trademarks

The registered trademarks of the Siemens AG can be found in the preface.

Impressum

Editor and Publisher: A&D PT1

Copyright Siemens AG 2002 Allrights reserved

The transmission and reproduction of this documentation and the exploitation and communication of its contents are not permitted without express authority. Offenders will be liable for compensation for damage. All rights reserved, especially in the case of the granting of a patent or registration of a utility model or design

Siemens AG

Bereich Automation & Drives

Geschäftsgebiet SIMATIC HMI

Postfach 4848, D-90327 Nürnberg

Exclusion of Liability

We have checked the content of this publication for compliance with the described hardware and software. However, discrepancies cannot be exclu- ded, with the result that we cannot guarantee total compliance. The informa- tion in this publication is, however, checked regularly, and any necessary corrections are included in the following editions. We welcome any suggesti- ons for improvement.

ESiemens AG 2002

Technical data subject to change.

Siemens Aktiengesellschaft

Release 04/02

Page 3
Image 3
Siemens PC 670 manual Correct Usage, Trademarks, Impressum