Siemens PC 670 manual Removing and installing an ISA/PCI module

Maintaining and Extending the Computing Unit Release 04/02

4.4.2Removing and installing an ISA/PCI module

To change the battery, perform the following steps:

1.Open the housing as described in section 4.1.

2.Disconnect all the connectors from the expansion module and note their assignment.

3.Remove the module retainer plates as described in section 4.4.1.

4.Undo the screw on the slot plate of the module.

5.Pull the module out of its slot.

6.Proceed in the reverse order to install the new expansion module.

Slots for expansion boards Module retainer plate

Figure 4-11 Removing and installing an expansion board

4-16 Panel PC 670 Computing Unit, Equipment Manual