Siemens PC 670 manual Removing and installing a CD-ROM drive, Computing unit with CD-ROM drive

Release 04/02 Maintaining and Extending the Computing Unit

4.5.2Removing and installing a CD-ROM drive

Depending on the hardware configuration of the device, a CD-ROM drive is installed on the computing unit. The installation depth of the computing unit is increased by 21 mm as a result of its installation.

1.Undo the 2 screws on the back of the system housing.

2.Remove the cover of the CD-ROM drive.

3.Undo the three screws which secure the CD-ROM on the mounting.

4.Remove the CD-ROM drive from the mounting and carefully pull off the data cable.

5.Proceed in the reverse order to install the new drive.

Fixing screws for CD-ROM cover CD-ROM drive with cover

Figure 4-14 Computing unit with CD-ROM drive

Panel PC 670 Computing Unit, Equipment Manual 4-19