Siemens PC 670 manual Submenu Boot Options, QuickBoot Mode Enabled

Configuring the Computing Unit in BIOS Setup Release 04/02

Submenu ”Boot Options”

The following submenu appears when you select the option “Boot Options” in the main menu:

PhoenixBIOS Setup Utility

Main

Boot Options				Item Specific Help
QuickBoot Mode:
	[	Enabled	]	Allows the system to
				skip certain tests
SETUP prompt:	[Enabled]			while booting. This
				will decrease the
POST Errors:	[Enabled]
				time needed to boot
Floppy check:	[Disabled]			the system.
Summary screen:	[Enabled]

F1 Help ESC Exit

Select Item	+ / –	Change Values	F9	Setup Defaults
Select Menu	Enter	Select Sub-Menu	F10	Save and Exit

Figure 5-5 ”Boot Options” Submenu

Quick Boot	Some hardware tests are skipped when the system starts up, thus
Mode	speeding up the boot procedure.
SETUP prompt	The message PRESS <F2> to enter Setup appears at the bottom of
	the screen during the system load phase.

POST Errors

The boot process is stopped if an error is detected; you must press F1 to acknowledge. Enter “Disabled”to avoid the necessity of acknowledging errors, for example if no keyboard is connected.

5-10 Panel PC 670 Computing Unit, Equipment Manual