Siemens PC 670 manual Adjusting the module retainer plate

Release 04/02 Maintaining and Extending the Computing Unit

Adjusting the module retainer plate

Proceed as follows to install the module retainer plate.

1.Insert the slide element through the guide slit until it is resting firmly on the module. The module must now be introduced into the notch.

Caution

Do not exert pressure on the module! Therefore, do not use force to press the slide module onto the module.

2.Remove the surplus slide element:

–Score the slide element at the top edge of the support with a knife and snap it off.

–Nip off the surplus with a sharp side cutter.

Panel PC 670 Computing Unit, Equipment Manual 4-15