Release 04/02

Configuring the Computing Unit in BIOS Setup

Screen Display Following Power On

For example, the default setting of your computing unit will display the following figure on the display on power on:

Phoenix BIOS 4.0 A5E00123801–ES02

Copyright 1985-2001 Phoenix Technologies Ltd.

All Rights Reserved.

SIMATIC Box PC 620 V02.01.02 CPU = Pentium[III 866MHz 637K System RAM Passed 119MB Extended RAM Passed 0128K Cache SRAM Passed System BIOS shadowed

Video BIOS shadowed

UMB upper limit segment address: ....

Fixed Disk 0: xxxx

ATAPI CD-ROM: Txxx

Mouse initialized

Press to enter SETUP

By pressing the F2 key when the above figure is displayed you will change to the BIOS Setup program based on the ROM. In this program, you can set a number of system functions and hardware configurations of your programming device.

The default settings are effective on delivery. You can change these settings using the BIOS setup. The modified settings become effective when you have saved them and terminated the BIOS setup.

The following screen shots may differ from what is shown here, depending on the device configuration.

Panel PC 670 Computing Unit, Equipment Manual

5-3

Page 91
Image 91
Siemens PC 670 manual Screen Display Following Power On