Pioneer AVH-P6450CD Contents

Contents

Connecting the power cord (1) .......................... 3

Connecting the power cord (2) .......................... 5

Connecting the system (A) ................................ 6

Connecting the system (B) ................................ 7

VIDEO Input / Output Connection .................. 8

DIN Front/Rear-mount ...................................... 9

DIN Front-mount .............................................. 9

DIN Rear-mount ..............................................11

CAUTION

• PIONEER does not recommend that

you install or service your display your-

self. Installing or servicing the product

may expose you to risk of electric shock

or other hazards. Refer all installation

and servicing of your display to autho-

rized Pioneer service personnel.

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare

wiring to remain exposed.

• Do not drill a hole into the engine com-

partment to connect the yellow lead of

the unit to the vehicle battery. Engine

vibration may eventually cause the insu-

lation to fail at the point where the wire

passes from the passenger compartment

into the engine compartment. Take

extra care in securing the wire at this

point.

• It is extremely dangerous to allow the

display lead to become wound around

the steering column or gearshift. Be sure

to install the display in such a way that

it will not obstruct driving.

• Make sure that wires will not interfere

with moving parts of the vehicle, such as

the gearshift, parking brake or seat slid-

ing mechanism.

• Do not shorten any leads. If you do, the

protection circuit may fail to work

properly.

Connecting the Units