11
Installation
7When the installation space is not very deep
When installing in a shallow space, secure with side brackets (small). In this case, stick
conceal tape on parts that protrude from the dashboard.
Fig. 11

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 12)
Fig. 12
Frame
Pullout to remove the frame.
(Whenreattaching the frame, point the
sidewith a groove downwards and
attachit.)
Holder
Afterinserting the holder into the dash-
board,then select the appropriate tabs
accordingto the thickness of the dash-
boardmaterial and bend them.
(Installas firmly as possible using the
topand bottom tabs. To secure, bend
thetabs 90 degrees.)
182
53 Rubberbush
Screw
Dashboard
Attachscrew
Sidebracket
(small)
Concealtape