Linksys HomeLink™ Series
Windows 98 Driver Installation
Overview
After installing your Phoneline 10M USB Network Adapter in your computer, follow these instructions to install the network driver. The installation proce- dure for the network driver will vary slightly depending on which version of Windows 98 you are using and your current system configuration. If you encounter problems during the installation, consult the Troubleshooting sec- tion on page 22 in the Appendix.
Installing the USB Network Adapter’s Driver
After installing the HomeLink Phoneline 10M USB Network Adapter, follow the instructions below to install the adapter’s software into your Windows 98 computer.
1.Start up your PC if you haven’t already done so.
2.Windows 98 will automatically detect the presence of the Linksys Phoneline USB Adapter hardware in your PC.
3.Slide the Linksys Driver Disk into your floppy drive when the Add New Hardware Wizard window is displayed. Click Next.
Phoneline 10M USB Network Adapter
4.Select “Search for the best driver for your device (Recommended).” Click Next.
5.Select “Floppy disk drives.” Click Next.
8 | 9 |
