Linksys USB200HA manual Novell NetWare 3.x Client Setup for Windows, Starting Over in Windows

Linksys HomeLink™ Series

Novell NetWare 3.x Client Setup for Windows 98

The instructions below explain how to set up the regular Novell NetWare 3.x client for use on a Windows 98 PC.

1.Follow the Windows 98 setup instructions.

2.Start up Windows 98. Click on Start, Settings, then Control Panel. Double-click on Network. The Network window appears. Click on the Configuration tab.

3.In the Primary Logon field, choose Client for NetWare Networks. If you don’t see this option, see page 25 to install this component.

4.Under the The following network components are installed window, high- light Client for NetWare Networks and click on the Properties button.

5.The Client for NetWare Networks Properties window appears. Under the General tab, enter the name of your network’s Preferred Server. Assign the First Network Drive Letter; the default is F. Make sure the Enable logon script processing is checked.

6.Click OK. Click on the Access Control tab. Make sure the Share-level access control option is selected; do not select User-level access control.

7.When you’re done, click OK to restart your PC.

The NetWare Client portion of your Windows setup is now complete.

Phoneline 10M USB Network Adapter

Starting Over in Windows 98

If you experience installation difficulties, you may need to reinstall all of the Windows networking components from scratch. The instructions below explain how to give your PC a clean sweep so you can retry the HomeLink Phoneline 10M USB Network Adapter’s driver installation.

1.On your Desktop, click on the Start Button, highlight Settings, and click on Control Panel.

2.Double-click on the Network icon.

3.If the Configuration field has a component called Dial-Up Adapter, skip forward to step 5. If it doesn’t, continue with step 4.

26 27