Linksys HomeLink™ Series
The Adapter’s LEDs
POWER | The Power LED will light up green when your USB |
| Network Adapter is connected to a power source. |
TX | The TX LED will light up green if your HomeLink |
| 10Mbps USB Adapter is successfully sending data over a |
| phoneline network. |
Link | The Link LED will light up green if your PC’s adapter is |
| actively connected to a phoneline network. |
RX | The RX LED will light up green if your HomeLink 10M |
| USB Network Adapter is successfully receiving, |
| or downloading, network data. |
The USB Icon
The USB icon shown below marks a USB port on a PC or device.
Phoneline 10M USB Network Adapter
USB Cabling
The HomeLink Phoneline 10M USB Network Adapter comes with one USB cable. One end of the USB cable has a rectangular connector called a Type A connector. The other end of the cable has a square Type B connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Type A |
| Type B |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The USB cable’s Type B tip connects to the USB device, that is, your USB Network Adapter. The Type A end connects to a computer’s USB port.
The picture below shows two USB ports as they might appear on your com- puter. Note the two USB icons marking the ports.
Modem and Fax Compatibility
If you want to have a phoneline network and a phone in one room with just one phone jack, you can still attach your phone to the jack by using a tele- phone jack splitter.
Plug your telephone or fax machine into one of the splitter’s ports, and your HomeLink phoneline 10M USB Network Adapter into the other.
4 | 5 |
