•When installing in a shallow space, use the following screw holes. In this case, stick conceal tape on parts that protrude from the dashboard.
Conceal tape
*1
*1
Fig. 15
Screw
Dashboard or Console
Factory radio mounting bracket *2
*2 If the screw holes of the bracket and the screw holes of this unit are not aligned, use a file to widen the screw holes of the bracket to match up the screw holes on this unit. Tighten the screws at 2 places on each side.
Fig. 16
Fixing the front panel
If you do not operate the removing and attaching the front panel function, use the supplied fixing screws to fix the front panel to this unit.
•Fix the front panel to the unit using fixing screws after remov- ing the front panel. (Fig. 17)
Fixing screw
Fixing screw
Fig. 17
Installing the remote control unit
When not using the remote control unit, secure it with velcro tape to pre- vent it from moving.
•Thoroughly wipe off the surface before affixing the velcro tape.
Remote control unit
Velcro tape (small) (hard)
Velcro tape (small) (soft)
Fig. 18
English
Español
Deutsch Français Italiano
Nederlands
16
